Bravilor Bolero Turbo XL 33

Bravilor markets the machine as the Bolero Turbo XL 33. Searching for "Bolero XL" will lead to a different machine at most dealers — more on that below; the form factor comes first.

464 millimetres wide, 504 deep, 845 high: this is 0.234 square metres of bench footprint, slightly more than an A2 sheet, at a height that stays below the wall-mounted cupboards on a standard work surface. The decisive comparison is within the range: the Bolero Turbo 33 without XL has the same depth and height but is only 326 millimetres wide. The XL thus costs 138 millimetres of additional bench space, a 42 per cent increase in width, with identical depth.

Bravilor's configuration table shows why this width is needed: both machines have 3 canisters, 3 mixers and 2 dispensing outlets. The difference is not in the 33-model configuration but in the housing, which accommodates up to 6 canisters and 4 mixers above — that is the Turbo XL 64 at the top of the same range. The XL 33 is thus the entry point to a chassis that upgrades, not the larger machine.

Dispensing height is 130 millimetres for cups and 251 millimetres for pitchers. The optional height extension raises it to 342 millimetres, or 91 millimetres more — this is the height at which Airpots fit beneath the outlet. Bravilor states that the Turbo can fill one Airpot and the Turbo XL two simultaneously. This specification is the principal reason to purchase the XL and appears in the brochure without qualification, unlike the capacity figures.

For context, a glance at the bottom of the same table is instructive. The Bolero Solo stands at 170 × 385 × 512 millimetres, with one 3.2-litre canister, 20 litres per hour and 2100 watts, sized for 100 cups per day. Between Solo and Turbo XL 33 lie a factor of 6 in daily recommendation, a factor of 2.2 in hourly throughput and a factor of 3.6 in bench footprint. Those selecting from the bottom of the range should weigh these three factors against their own demand before moving to the widest configuration — the table offers eleven additional columns between the extremes.

As of 10 September 2026. All dimensions, connection values and capacity data from Bravilor's configuration table version V15.07/25; dealer data retrieved on the same date.

The architecture is an instant system: dry ingredients lie in canisters, a metering auger delivers them to a mixer, hot water is added there, and the finished beverage flows out through one of 2 dispensing outlets. No brew group, no grinder, no milk circuit. This determines everything else — maintenance, beverage quality and power draw.

Here lies the finding that affects purchasing cost. The product page for the XL 33 carries the sentence "Available in the 400V variant, for a capacity of 104L per hour". The same sentence appears word-for-word on the XL 33 400V page. This means: the 104 litres per hour are not a property of the XL 33 itself but of a separate article number. The single-phase XL 33 delivers 44 litres per hour at 3500 watts on 230 volts, according to the configuration table. The 400-volt version delivers 104 litres, but draws 10500 watts from a three-phase supply.

Calculated: this is a throughput increase of 136 per cent for a 200 per cent increase in connection power. Per litre: 80 watt-hours single-phase versus 101 watt-hours three-phase, or 27 per cent more energy for the same litre — under full load, and only then. Choosing the 400-volt version buys peak performance, not efficiency. Those who do not need it should not have the three-phase connection installed.

Operation is via a touchscreen with size selection S, M and L and up to 36 stored beverages. Bravilor names three functions visible on the screen and visible in the manufacturer's photographs: an Eco mode that can be switched on and off, a Recipe Editor accessible via QR code, and a maintenance history that logs rinse, descaling and filter changes with date. For an operator in a clinic or care facility, the maintenance history is the most practically important of these three, as it provides proof without requiring anyone to keep a manual log.

Bravilor's product page lists twelve beverages: coffee, coffee cream, espresso, double espresso, cappuccino, cappuccino dark, café latte, latte macchiato, Viennese mixture, drinking chocolate, drinking chocolate deluxe and hot water. The configuration table, by contrast, lists up to 36 possible beverages. Both are consistent: the twelve are the factory recipes, the 36 the storage ceiling. Those truly expanding the range need the canister count — with three canisters, recipe combinations face limits, and this is exactly where the XL chassis pays dividends later.

On hygiene, Bravilor lists three verifiable points: the touchscreen has no buttons and wipes clean with a cloth; all components are removable for cleaning without tools; and separate hot water is available according to the table for the XL 33, eliminating the need for a second kettle. For public-facing locations, the buttonless front is the most relevant of these points.

Bravilor recommends 650 cups per day. This figure applies equally to the Turbo XL 33, the Turbo 33 without XL and every other Turbo variant up to the XL 64 — in the configuration table, all eleven Turbo columns show the same 650. The XL thus does not buy daily throughput. It buys concurrent dispensing and range breadth.

Calculating the daily recommendation against hourly throughput: 44 litres per hour equals 352 cups in the hour at a reference cup of 125 millilitres. The recommended 650 cups thus represent 1.8 hours at full capacity. The daily recommendation is not a capacity ceiling but a statement on wear and refill frequency. With the 400-volt version, this would be 832 cups in the hour and the daily recommendation reached in just under 47 minutes.

The supply: 3 canisters at 5.3 litres each, totalling 15.899999999999999 litres of dry volume. How many cups are contained here cannot be derived from the data sheet, since dosage varies by ingredient and by recipe — Bravilor makes no statement on this, and independent estimation would be speculation here, not calculation.

The dual dispensing is the core function: two pitchers of 2 litres each simultaneously in 90 seconds. This is four litres in one and a half minutes, extrapolated to 160 litres per hour — 3.6 times the single-phase continuous rating and still 1.5 times the three-phase. The 90 seconds thus describe a peak for the individual dispensing event, not a rate sustainable over an hour. For a break room where twenty people stand in five minutes, this peak is the point; for a canteen dispensing over two hours, continuous throughput is what counts.

The instant system has three wear points, all visible in the manufacturer's photographs: the canisters, the mixer bowls and the dispensing lines. The mixer bowls sit in a row behind the front panel and are removable without tools; the outlets are marked in orange and can be unscrewed individually. Bravilor lists as daily tasks rinsing via the control panel, an automatic descaling alert and a cleaning programme.

What this means relative to a bean-to-cup machine: there is no brew group to remove, no grinder to adjust and no milk circuit to disinfect. The price is beverage quality — instant coffee remains instant coffee, even with 36 stored recipes. Those requiring freshly ground coffee are fundamentally in the wrong product line and should look to the bean-to-cup machines from the same manufacturer.

The maintenance history in the display logs rinse, mixing system, descaling and filter changes with date. The manufacturer's photograph shows an entry with time and date. For operator documentation, this is the difference between a managed record and an assertion.

On water connection: the Turbo range is designed as a fixed-water machine. Bravilor does not name a tank variant for the Turbo XL — without a connection, this machine cannot be operated. This is not inference but the finding from the configuration table, where no tank option is listed for any Turbo column.

Bravilor publishes no list price. And price comparison becomes opaque because similar model names refer to three different machines in circulation. This is the second finding of this review, and it is the costlier one.

One German dealer lists a "Bolero Turbo XL 403" with these data: 473 × 475 × 812 millimetres, 4 product containers, 40 litres per hour at 230 volts (320 cups) and 120 litres at 400 volts (960 cups), dispensing height 247 millimetres for pitchers and 110 for cups. The connection values are identical to the current XL 33 (3500 and 10500 watts), everything else differs: width up 1.9 per cent, depth and height down 5.8 and 3.9 per cent, single-phase throughput down 10 per cent — and three-phase up 15 per cent. The 960 cups per hour from the old sheet is notably more than the 104 litres Bravilor states today.

A British dealer lists a Turbo XL 43 as a single-phase machine with 32 amperes and 6000 watts at 76 litres. This also fits no column in the German configuration table, where single-phase Turbo XL variants show 3500 watts and 44 litres.

For ordering: go by article number, not name. The current single-phase version is 8.020.470.31011. Those ordering "Bolero XL" or "Turbo XL 403" may receive a machine with a different dispensing height — and 247 instead of 251 millimetres determines whether existing pitchers fit under the outlet.

Price-for-performance cannot be expressed in euros per cup without a list price. What can be said: the premium from the Turbo 33 to the Turbo XL 33 buys neither more cups per day nor more canisters, but 138 millimetres of housing that will later hold up to 6 canisters and the concurrent two-pitcher dispensing. Those needing neither pay for the XL without return. Those requiring the upgrade path buy it here at the lowest entry to the XL range.